Solidworks Drawing Annotation Note Box Background

Creating Notes

The Note control lets you insert text entities.

Notes are formatted text blocks, non singleline text.

Use the Notation Formatting pop-up toolbar to apply formatting options as yous type text.

To create Notes:

1. Click Draw > Text > Note (or blazon Note).
2. In the graphics surface area, specify the first corners of the text box.
3. Notation: The text box roughly locates the placement for the Text but substantially determines the line length. Text wraps onto the next line if the width is insufficient.
3. Specify the opposite corner of the text box or specify an selection:
   • Bending: Specifies the insertion angle of the Note.
   • Superlative: Specifies the text height used within Note.
   • Justify: Specifies the text justification within the Note text box (for example, TL for top left alignment). (Vertical alignment: T = top, Grand = middle, B = bottom; horizontal alignment: Fifty = left, C = center, R = right).
   • Line spacing: Specifies line spacing used within the Note. Line spacing is the vertical altitude betwixt the baseline of a line of text to the baseline of the next line of text. Specify an option:
     • At least. Sets the minimum line spacing that is needed to fit the largest font on the line.
     • Exactly. Sets fixed line spacing distance or factor. To space all lines evenly within a paragraph, employ exact spacing and specify an amount of space that is large enough to fit the largest character in the line.
   • Text Style: Specifies a TextStyle.
   • Width: Specifies the width of the text box.
4. Type and format the text.
5. The cursor displays at the current location in the Note.
6. Use the Note Formatting popular-up toolbar equally needed (encounter Using the Note Formatting Pop-up Toolbar).
7. Correct-click to utilize the post-obit options:
   • Text Import. Inserts text from an ASCII text file (*.txt) or Rich Text Format file (*.rtf).
   • Combine paragraphs. Merges selected paragraphs into i.
   • Remove Formatting. Lets you lot Remove Graphic symbol Formatting, Remove Paragraph Formatting, or Remove All Formatting from the selected text.
   • Paste Special. Lets you Paste without Character Formatting, Paste without Paragraph Formatting, or Paste without Any Formatting from the clipboard. To paste text from the clipboad with formatting, click Paste on the shortcut menu.

     Note: Other options on the shortcut menu are available on the Note Formatting pop-up toolbar.

  To fill the space indicated by the text box and wrap the text equally needed, continue the line entry beyond the visual extents of the text box.

Using the Annotation Formatting Pop-up Toolbar

Use the Note Formatting pop-up toolbar to edit and format Notes, SmartLeaders, and Leaders.

To open the Note Formatting pop-up toolbar:

• When you type a Note, right-click and click Editor Settings > Show Toolbar.

To format Text using the Note Formatting pop-upward toolbar:

• Specify the options as needed:
  1. TextStyle: Specifies a TextStyle.
  2. Text Font: Specifies a typeface using an SHX file or a True Type Font file. SHX files are installed with the system. In addition, you can use whatsoever Truthful Blazon Font installed on your reckoner .
  3. Text Summit: Specifies the text height for subsequent or selected text. Select a value from the list or type a value. The text peak is the distance from the baseline to the height of a regular majuscule glyph (cap line) and is also known as the cap elevation.
  4. Bold: Specifies bold formatting for subsequent or selected text. Applicable with True Type Fonts only.
  5. Italic: Specifies italic formatting for subsequent or selected text. Applicable with True Type Fonts only.
  6. Underline: Specifies underline formatting for subsequent or selected text.
  7. Overline: Specifies overline formatting for subsequent or selected text.
  8. Strikethrough: Specifies strikethrough formatting for subsequent or selected text (draws a line through the middle of the text).
  9. Stack/Unstack: Stacks or unstacks selected text representing fractions or tolerances. See Using Stacked Text in Notes for detailled information.
  10. LineColor: Specifies the color for subsequent or selected text.
  11. Ruler: Displays a ruler at the top of the text box.
  12. Insert Field: Inserts a Field at the cursor position.
  13. More Options: From the menu, select an selection:
      • Find and Supplant: Lets you lot search for text strings and replace text strings.
      • AutoCAPS: Creates new text with uppercase characters. To alter the instance of existing text, highlight the text, then right-click, and click Modify Case. AutoCAPS does not affect existing text.
      • Character Set: Specifies a lawmaking page to use to selected text.
      • Editor Settings: Specify options:
        • Always brandish as WYSIWYG: Controls text display when you edit text. When selected, text is displayed with the size and insertion angle as defined. When cleared, text that is very small, very big, or rotated and hard to read is displayed at a legible size and horizontally oriented so you lot can read it easily.
        • Evidence Toolbar: Shows or hides the Note Formatting pop-up toolbar.
        • Text Highlight color: Specifies the background color when text is selected.
      • Background Mask: Specifies an opaque background color behind the Annotation.
  14. Disengage: Removes the previous text editing or formatting.
  15. Redo: Restores the land prior to issuing Undo.
  16. Copy: Copies highlighted text to the clipboard.
  17. Cut: Removes the highlighted text and copies the text to the clipboard.
  18. Paste: Inserts text from the clipboard at the cursor position.
  19. Uppercase: Changes the case of highlighted text to majuscule.
  20. Lowercase: Changes the case of highlighted text to lowercase.
  21. Line Spacing: Changes the spacing betwixt lines of text. The line infinite factor applies to the entire Note. From the card, select an option:
      • 1.0, i.5, 2.0, 2.v, or iii.0: Sets line spacing to the i of these factors.
      • Paragraph Options: Displays the Paragraph Options dialog box to specify paragraph justification, indentations, line spacing, and tab settings in ane operation.
      • Add space earlier paragraph / Remove space before paragraph: Adds or removes infinite before a paragraph. Suit the appropriate value for thespace before paragraphs in the Paragraph Options dialog box.
      • Add space after paragraph / Remove space after paragraph: Adds or removes space after a paragraph. Adapt the appropriate value for the space after paragraphs in the Paragraph Options dialog box.
  22. Paragraph Alignment: Changes the horizontal alignment of paragraphs (left-aligned text, right-aligned text, centered text, or justified text, which is aligned evenly forth the left and right margins).
  23. Bullets and Lists : Makes subsequent or selected text a bulleted list, a numbered list, or a lettered list (uppercase or lowercase), or turns off the list property.
  24. Alignment: Sets the justification and alignment in relation to the insertion point of the Notation.
  25. Insert Symbol: Inserts a symbol (degrees, plus/minus, bore, and other symbols and characters such as non-breaking spaces) at the cursor position.
  26. Oblique Angle: Specifies the camber of the characters in relation to the text baseline. A positive value for the obliquing angle slants text to the right, a negative value slants text to the left (in the range of 85 to -85).
  27. Tracking Factor: Enhances (> i.0) or reduces (< one.0) the distances between characters.
  28. Width Factor: Specifies the enlargement (> one.0) or reduction (< i.0) of the text characters width.
  29. Help : Displays this aid topic.
  30. OK: Finishes Notation creation.

Note: Use the NoteOptions command to specify whether you desire to edit Notes in place or in a dialog box.

Using the Annotation Formatting Ruler

Use the Note Formatting ruler to set paragraph indents and tab stops for Notes.

The ruler appears with the Note Formatting popular-upwards toolbar. It is located at the top of the Annotation bounding box.

By default, there are no paragraph indents or tab stops on the ruler when you first a new Note.

Paragraph indents and tab stops that you fix before you start to enter text apply to the entire Note. When y'all type or edit, place the pointer in the paragraph to format or select multiple paragraphs to adjust indents and tab stops.

This example shows first line indent, left indent, right indent, and two left tab stops set:

To prepare paragraph indents:

1. Identify the pointer in the paragraph to format, or select multiple paragraphs.
2. On the Note Formatting ruler, slide indent markers:
3. The indent settings are maintained for subsequent paragraphs equally you type.

To set tab stops:

1. Identify the arrow in the paragraph to format, or select multiple paragraphs.
2. Click the tab selector at the left terminate of the ruler until it displays the type of tab you want to employ:
3. Click the ruler at the location you want to place the tab cease.
4. As you click or drag tab stops, tooltips show the exact position from the left (in cartoon units).
4. Repeat the steps higher up as needed.

Notation: When multiple paragraphs are selected, simply the tab stops from the beginning paragraph bear witness on the ruler.

To relocate tab stops:

• Drag existing tab stops left or right along the ruler.

To remove tab stops:

• Drag a tab stop (up or down) off the ruler. When you release the mouse button, the tab stop disappears.

To set up paragraph indents and tab stops using the Paragraph Options dialog box:

• Double-click the ruler.
• The Paragraph Options dialog box opens. Notation that a tab stop has been created where you clicked.

Note: If you practice non encounter the horizontal ruler that runs along the pinnacle of the certificate, click Ruler on the Note Formatting pop-up toolbar.

Command: Note

Menu: Describe > Text > Notation

pearlmanbage1937.blogspot.com

Source: http://help.solidworks.com/2019/english/draftsight/html/hlpid_draw_mtext.htm

Share this post